Energy Monitoring

While Technological advancement have helped a lot with the energy saving concepts and technologies, it’s time that we keep a keen watch upon them. Standing this era, we should be very careful on how we capitalise our energy resources.

MosChip brings you a unique fleet of energy monitoring technology, that would not help you to conserve a lot of energy at the same time would be cost effective too!

Some of the unique solution are listed below.

Street lightning:

The major wastage of light energy, can be seen when it comes to street light. It can be regularly noticed that the street lights are switched on in the day light or are not wisely utilized. MosChip have got the perfect solution to this. MosChip brings out Automated street lighting solution with feeder level automation.

With the latest unique features, Moschip brings out the best of Smart street lightning solutions. From multiple Streel light control with just one feeder, to the power control which can be monitored or changed via SMS. Save as much as 30% electricity with centrally monitored and controlled light reporting. Another Major feature of MosChip’s Smart lightning is, you can schedule it according to the sunrise and sunset based on summer or winter. Read the best features and benefits given below to know more.

The key benefits:

  • Multiple street lights control from one single feeder for one or multiple phases.
  • ON / OFF schedule which can be monitored and changed via SMS.
  • Receive alerts in case of theft / fault in the lights.
  • 30% reduced electricity bill.
  • Centralized monitoring and control of lights with reporting.
  • Receive current readings & device fault details via SMS.
  • Customized solutions to match your requirements.

Features

  • Single electronic unit (DCU) shall support one phase or three phase feeders.
  • Electricity saving modes:
    • Time based scheduling and ON / OFF control with day light harvesting.
    • Sunrise / sunset based scheduling for summer / winter season.
  • Secure cloud based graphical user interface for collecting real time data with ability for further analysis.
  • Support for smart phone for monitor and control and alerts.
  • Fault detection alarms and events informed via email / SMS.
  • Daily / monthly / weekly reports:
    • Phase wise electricity consumption.
    • ON / OFF audit reports.
    • Fault and error notification.

Features

  • Single electronic unit (DCU) shall support one phase or three phase feeders.
  • Electricity saving modes:
    • Time based scheduling and ON / OFF control with day light harvesting.
    • Sunrise / sunset based scheduling for summer / winter season.
  • Secure cloud based graphical user interface for collecting real time data with ability for further analysis.
  • Support for smart phone for monitor and control and alerts.
  • Fault detection alarms and events informed via email / SMS.
  • Daily / monthly / weekly reports:
    • Phase wise electricity consumption.
    • ON / OFF audit reports.
    • Fault and error notification.

Solar and windmill

Solar and windmill energy generation plants are having an unprecedented growth to meet up the requirement for clean- green environment. With the growth of the industry, also grows the insufficiency. As the number of installation increases so increases number of factors. Such as monitoring more mills, to cope up with the downtime, loss of energy production and many more.  And thus, here comes MosChip to rescue and to address most of the Energy monitoring problem.

All renewable energy generation plants, such as windmills and solar firms, needs keen monitoring solution. This is done because, it makes the management procedure easy at the same time pocket friendly operational cost. MosChips Solar and windmill energy monitoring solution helps you have a remote monitoring without being physically present there.

While everything makes the procedure easier, MosChips windmills and solar firms also reaches upto 30+ km when implemented with mesh network. With reduced cost of maintenance and high ROP, this can be the best choice currently available in the market.

All the data generated are real time and are available on the cloud application, which can be easily accessed via phone or another digital medium. The solution can help you to take informed business decisions and save on operational costs.

With all said and done, mosChip also provide the customised solution, tailor made to your need and want.

Key benefits

  • Avoid cost of new wire installation
  • Reduce cost in maintenance, caused by wire cuts / damages
  • Over-the-air firmware and upgraded configuration
  • Line of sight reach of up to 600 meters
  • Reach up to 30+ kms when implemented with mesh network
  • Data to make informed business decisions
  • Customized solutions are available.

Features

  • Integration with SCADA / windmill controllers
  • Alarms and events using email / SMS in case of
    • Breakdown
    • Maintenance
  • Energy generation report on your mobile phone
  • Easy integration with your existing SAP / ERP systems
  • Supports existing Modbus protocol
  • Can be integrated with custom protocol
  • Supports up to 500 windmills with single DCU
  • Events and alerts sent via SMS / email to registered user

Township Monitoring

Imagine you are living in a society with more than 100+ house hold. How would someone monitor individual consumption?? No doubt it is tough to get an individual record and reading of every single consumption. But with MosChip, your energy monitoring gets easier.

With MosChip, it gets easier to get a real time reading and monitoring of individual energy consumption and give it check whenever and wherever needed.  The solution that MosChip renders under township monitoring is a combination of utility monitoring, DG set monitoring and periphery lighting. This is mainly done so that it can give the consumer, a one point contact to the entire community. Further all the data can be collected by the township operator, which would further help them to track consumption of every services along with the billing.

Moschip broadly dives these services in four different sectors. They are as the following:

  • Power back up and DG set monitoring
  • Electricity sub-metering
  • Water sub-metering
  • Periphery lighting

Power back up and DG set monitoring

MosChip renders solution for DG set monitoring which allows one to observe DG set parameters such as operational hours, energy produced and fuel consumption. The data which is uploaded to the cloud application are all real time and can also be observed using smart phones. Now you can see and get updates on- the- go.  This would not only help you to get a glace of your consumption but also help you take necessary upgrades, or steps whenever and wherever required. Get the latest update on your phone via SMS or email. Yes now, you can also get your performance report on weekly or monthly basis.

This solution from MosChip comes with a fuel sensor that provides fuel data with 98% accuracy. This helps in detecting fuel thefts, and saving money on it. The service you get here is can also be integrated with Modbus protocol.

The key benefits of the solution involve:

  • Datas are uploaded to the Internet in real time
  • Individuals get SMS / email to registered user
  • This service can be integrated with existing Modbus protocol
  • This service can be used to set reminders for maintenance
  • Daily, weekly, monthly reports regarding the performance of the DG set
  • Use data to make sure that DG is performing optimally.

Electricity sub-metering

MosChip’s electricity sub-metering solution can be considered as the perfect solution which helps to keep track on how much electricity is consumed by each household. With the least maintenance cost and high output this might be the perfect choice to opt for.

MosChip’s Mesh algorithm data allows single DCU to collect data of more than 300 meters, that too also wirelessly. This data is made available on the Internet so that it can enable remote monitoring. Which in return would help in accurate billing. The data collection is completely automated with the use of Data Concentrator Unit (DCU), which is partially manual by the use of Hand Held Unit (HHU).

Apart from all these, you also get to have sms and email alerts, that would help you track you consumption on a regular basis. Upon which you can take necessary segregations and steps to control your day to day need of energy consumption.

MosChip, proves itself to be the best of its kind in the field of energy monitoring. Among 100 odd reason to choose MosChip over others, here is list below that states the benefits of the solution that we render.

  • Changes are not required in current protocol or hardware
  • Data collection can be done by DCU or third part Hand Held Unit (HHU)
  • collected data may consists of all parameters supported by meter
  • Mesh algorithm allows single DCU to collect data of more than 300 meters, wirelessly
  • Works for single source and dual source meters in order to differentiate between
    power drawn from electricity board and DG set
  • Events and alerts are sent via SMS / email to registered user
  • Faulty or non-working meters can be pinpointed
  • No maintenance cost associated with the solution

Water sub-metering

MosChip’s water sub-metering solution lets you know the exact water consumption done by a single house hold. The solution is generally being used in both domestic & industrial setups. It has proved to be of great success, in both these places. The data harvested is uploaded to the cloud application, which can further be accessed via smart phones.

The benefits of the solution include:

  • No change required to current protocol or hardware
  • Data can be collected by DCU or third part Hand Held Unit (HHU)
  • Data collected consists of all parameters supported by meter
  • Mesh algorithm allows single DCU to collect data of more than 300 meters, wirelessly
  • Works for single source and dual source meters in order to differentiate between power drawn from electricity board and DG set
  • Events and alerts are sent via SMS / email to registered user
  • Faulty or non-working meters can be pinpointed
  • No maintenance cost associated with the solution