Individual Lighting Control (CCMS-ILC)
Our CCMS-ILS is a more advanced solution with which individual lighting pole can be controlled and monitored. Each lighting pole has a low power wireless lighting control with the ability to add few sensors like motion, ambient light, environmental parameters etc. Each lighting pole then gets connected to the internet using a gateway with wireless installed in the feeder panel. Our CCMS-ILC solution enables individual lights on pole to be controlled as ON/OFF/Dimming saving further energy and balancing the phase load.
Key Features of CCMS - ILC
- The solution enables control of every street light from a secured cloud through a gateway (SLC – Site Lighting Controller).
- A single gateway (SLC) supports up to 300 lighting poles thru wireless ILC (Individual Lighting Controller). This lowers recurring internet 2.5G/4G data costs.
- The CCMS – ILC offers 2 electricity saving modes:
-
- Time-based scheduling and ON/OFF/Dimming control with daylight harvesting.
- Pre-defined templates for one-in-two, one-in-three or customized ON/OFF/Dimming Schedule.
- Override support to switch ON/OFF individual lights as and when required.
- Light / Motion sensor-based control.
-
- Optional Metering of every individual streetlight
- The solution uses low power wireless communication with 128-bit AES security
- The solution is easy to install, plug-n-play retrofit solution. The retrofit solution, no separate wiring required for group lighting control, can be installed in the existing electrical system further saving costs.
- The solution enables centralized monitoring and control of lights from a single dashboard, which can be accessed from anywhere using our secure cloud application (CCMS-Cloud). It collects real-time data for further analysis.
- The solution gives access to detailed electricity consumption reports which helps in making informed decisions.
- The solution sends instant alerts via SMS/Email in case of lamp faults or power thefts.
- The solution also supports mobile applications for on-the-go monitoring and control with alerts.
- The solution sends instant alerts to registered Email/mobile number in the case of fault detection or events.
- The solution offers daily/weekly/monthly reports for electricity consumption, ON/OFF/Dimming audit reports, fault & error notification and user activity report.
- The solution helps reduce the energy bill by up to 30-40% with automated dimming, scheduling, ON/OFF and real-time reports
- Over the air configuration and firmware upgrade of SLC and ILC
- Modular, scalable lighting management platform. Ease of deployment and maintenance
- The solution can be tailored as per the requirements from design to delivery for the OEMs and System Integrators.
Key Benefits
- The individual light poles can be automated for ON/OFF/Dimming control without extra wiring.
- A single gateway supports up to 300 lighting poles.
- The CCMS – ILC offers the following electricity saving modes:
- Time-based scheduling and ON/OFF/Dimming control with daylight harvesting.
- Pre-defined templates for one-in-two, one-in-three or customized ON/OFF/Dimming Schedule.
- Individual lights dimming control as desired.
- Override support to switch ON/OFF individual lights as and when required.
- Light sensors/motion sensor input based control.
- The solution is easy to install, plug-n-play retrofit solution.
- The solution has secured cloud-based application for collecting real-time data for further analysis.
- The solution supports mobile applications for on-the-go monitoring and control with alerts.
- The solution sends instant alerts to registered Email/mobile number in the case of fault detection or events.
- The solution offers daily/weekly/monthly reports for electricity consumption, ON/OFF/Dimming audit reports, fault & error notification and user activity report.
How it works?
- The low power wireless lighting controllers (ILCs) are integrated with street light fixtures / panels. These can be easily retrofitted with lamps.
- Our SLCs are installed at feeder panel or any other convenient location in area
- These ILCs are wirelessly connected to our SLC
- SLC communicates with the cloud server over 2.5G/4G or Ethernet backbone
- SLCs are configured from our cloud to operate as per the pre-defined schedule or the schedule can also be derived from astronomical clock or ambient light sensors or motion sensors connected to ILC/SLC.